How do I setup a D Link DNS-323?

Your setup may look slightly different.

  1. Configure the DNS-323 for access from your network.
  2. Go to Setup > Device.
  3. Browse into the DNS-323 using Windows Explorer and create the directory structure you wish to use.
  4. Log into the DNS-323 configuration pages and go to Advanced > Users.
  5. Go to Advanced > Network Access.

How do I setup my DNS 320L?

D-Link DNS-320L Quick Install Guide Manual Installation

  1. Remove the top cover of your device by pressing the push button in and then lift the cover up.
  2. Attach the strap to your hard drive(s) with the supplied screws.
  3. Insert one or two 3.5” SATA hard drive(s) into the drive bay until they are firmly seated.

How do I access my DNS 320 from the internet?

How to Access the Web Interface of the DNS-320 Remotely using D-Link Router

  1. Put a check mark on the row to enable the rule.
  2. Enter a name for the policy you would like to create.
  3. Enter the IP Address of the DNS-320 (On Step 2)
  4. Enter Port 80 both on Public and Private port.

How do I setup a static IP address on my Dlink router?

Here’s how to do it in five easy steps:

  1. Fire up your D-Link router’s Web configuration screen and click on its Setup tab.
  2. From there, click on Network Settings on the sidebar.
  3. Scroll down to the Add DHCP Reservation section, check the Enable box and add your device’s name.
  4. Add your device’s IP Address and MAC Address.

How do I setup the dns-323?

The Wizard is an easy to use utility for basic setup of the DNS-323. Here you will configure the administrator’s password, time, LAN connection type, and additional settings of your DNS-323. Step 1: Click ‘Run Wizard’ to begin.

How do I check for new firmware on the dns-323?

The DNS-323 Firmware menu makes it simple to check for new firmware releases and upload them to the device. This section provides a link to check for new firmware on the D-Link support website. If a new firmware is available, download the file to your local computer.

What is the dns-323 AV server?

The DNS-323 features a UPnP AV Server. This server provides the ability to stream photos, music and videos to UPnP AV compatible network media players. If the server is enabled, the DNS-323 will be automatically detected by UPnP AV compatible media players on your local network.

What is the LAN link speed for the dns-323?

The LAN Link Speed is set to Auto by default, but can be manually set to 100Mbps or 1000Mbps. Selecting DHCP Client will cause the DNS-323 to obtain an IP address from the local DHCP server.