When can you descend on a feeder route?
Once you are established (i.e. after FIXXX) you may descend in accordance with the published approach procedure. I have not experienced this, but an instructor brought up this possibility during a discussion on feeder routes.
What is a feeder route in aviation?
Feeder Route. A feeder route is a route depicted on IAP charts to designate courses for aircraft to proceed from the en route structure to the IAF. Feeder routes, also referred to as approach transitions, technically are not considered approach segments but are an integral part of many IAPs.
When can you descend on an RNAV approach?
As long as you hear the magic words “cleared approach,” you can begin your descent as soon as you cross the IAF the first time (while beginning your teardrop maneuver) and continue to descend to the minimum altitude while in the circuit, which is at or above 2000 for this particular procedure.
What is a Der in aviation?
These designees are called Designated Engineering Representatives, or DERs . A DER is an individual, appointed in accordance with 14 CFR section 183.29, who holds an engineering degree or equivalent, possesses technical knowledge and experience, and meets the qualification requirements of Order 8100.8.
How are feeder route depicted?
A feeder route is a route depicted on IAP charts to designate courses for aircraft to proceed from the en route structure to the IAF. Feeder routes, also referred to as approach transitions, technically are not considered approach segments but are an integral part of many IAPs.
Do RNAV approaches have vertical guidance?
Vertical guidance is not provided. When the aircraft reaches the final approach fix, the pilot descends to a minimum descent altitude (MDA) using the onboard barometric altimeter (aka “dive and drive”).
Is RNAV considered a precision approach?
Since RNAV approaches flown to LPV minima are not technically precision approaches, all RNAV (GPS) approaches are considered non-precision; therefore, the standard non-precision minimums apply: 800-2. That was for planning and filing purposes only.
What speed do planes descend at?
Idle descent in many jets is around 3,000 feet per minute until reaching 10,000 feet. There is a speed restriction of 250 knots below 10,000 feet, therefore the flight management computer will slow the aircraft to 250 knots and continue the descent at approximately 1,500 feet per minute.
What is a feeder route?
What is feeder route meaning?
Definition of feeder road : a road that serves as a traffic feeder to a more important road (as a turnpike) — compare secondary road.