What is equivalent to Mobil DTE 15m?
Chevron Rando HDZ ISO 46.
What is equivalent to Mobil DTE 11?
MOBIL DTE 10 EXCEL 15 ZINC FREE, ISO-15 (REPLACES DTE 11M), 5 Gallon Pail. Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
Is Mobil DTE hydraulic oil?
Mobil DTE™ premium hydraulic oils are designed to help minimize maintenance downtime to limit costs and boost productivity. On average, operators saved almost $40,000* in total costs by using Mobil DTE™ premium hydraulic oils.
What is equivalent to Mobil DTE 26?
Shell Tellus S2 MX 68.
What is equivalent to Mobil DTE 13?
Chevron Rando HDZ ISO 32.
What is the difference between DTE 25 and DTE 26?
Mobil DTE 25 is an ISO Grade 46 hydraulic oil. Mobil DTE 26 is an ISO Grade 68 hydraulic oil.
Is there a difference between hydraulic oil and hydraulic jack oil?
What is hydraulic jack oil and how is it different from ordinary hydraulic fluids? The answer is clear, that hydraulic jack oil itself is a hydraulic fluid that is used for power generation, sealing, heat transfer, lubrication and more. But, we differentiate these fluids on the basis of its properties.
What viscosity is DTE 25?
Properties and Specifications
|Property||MOBIL DTE 21||MOBIL DTE 25|
|Kinematic Viscosity @ 100 C, mm2/s, ASTM D445||2.7||6.7|
|Kinematic Viscosity @ 40 C, mm2/s, ASTM D445||10||44.2|
|Pour Point, °C, ASTM D97||-30||-27|
|Rust Characteristics, Procedure B, ASTM D665||PASS||PASS|
What is Mobil DTE 24 used for?
Applications. Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products. Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset. Where small amounts of water are unavoidable.
Are all hydraulic oils compatible?
Although new hydraulic fluids may be compatible, in-service fluid of the same type may be degraded or contaminated to such an extent that the new fluid added may not be compatible with the system fluid.
Is it OK to mix hydraulic oils?
CAN I MIX HYDRAULIC FLUIDS? As far as possible, it is always best to avoid mixing different hydraulic fluids. This is because the technical properties could be spoiled by chemical reactions between different additives.