Why does my Bunn coffee maker drips slow?
The most likely reason for your coffee maker’s slow brewing pace is that it needs to be cleaned. Water from your tap can build up calcium and minerals deposits in your coffee maker and make it brew slowly.
What causes a Bunn coffee maker to leak?
The main reason behind Bunn NHBX leaking from the bottom and sides is the damage and wear of the silicone gasket. The good news is you can repair it at home, either by reinforcing a current seal or by replacing the gasket with a new one. All you need is a bit of your time, a screwdriver, an adhesive, and a new gasket.
Why is my Bunn coffee maker making cold coffee?
If your machine is serving you cold coffee, make sure it’s plugged in, turn the switch on and allow 15 minutes for the water to heat up. If you make decaf, fine grind or use soft water, you may need to use a special flow restrictor sprayhead, which can be ordered from Bunn, to prevent the funnel from overflowing.
How can I speed up my Pour over?
You can use water close to a boil. According to James Hoffmann, this will speed up the brewing process. You can brew smaller batches. A 15 gram dose in a pour over cone is less likely to stall compared to a 30 gram dose.
What am I doing wrong with my pour over coffee?
If your grind is not consistent it will have particles of varying size. The finer particles will extract quickly and then impart bitter flavors to the coffee. And the coarsest particles will be under-extracted and will impart sour flavors. Both will be present in coffee that is incorrectly ground.
How do you clean a clogged Bunn coffee maker?
Here’s how to do it.
- Make a solution of one part vinegar to two parts distilled water. Vinegar is acidic and can easily break down calcium deposits.
- Pour the descaling solution into your coffee maker and initiate a brewing cycle.
- Perform at least three to five rinses by running a brewing cycle with only water.
Can I use my Bunn O Matic to make coffee?
If you are using a Bunn O Matic that is not plumbed in (ie water will automatically come out of equipment when you press the button but you don’t have it connected to piping), you can still make coffee. I wrote an article on using the feature that allows you to add your own water
Can I add my own water to my Bunn O Matic?
My Bunn O Matic Is Not Piped In So I Want to Add My Own Water – How? If you are using a Bunn O Matic that is not plumbed in (ie water will automatically come out of equipment when you press the button but you don’t have it connected to piping), you can still make coffee.
How to use a Bunn O Matic pool hose?
If you put the hose directly under the water and let water out, the water will keep filling the pool without spraying off the top and over the side. Try to get your Bunn hose positioned so that the water fills below the water line as it fills. My Bunn O Matic Is Not Piped In So I Want to Add My Own Water – How?
How do I get in touch with Bunn?
BUNN Equipment Tech Services. (800) 286-6070. Warranty lookup. BUNNserve Pro. (800) 209-2866. Login to BUNNserve portal. Espresso support hotline. (800) 436-0297.