What size is a ice maker supply line?

The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.

Can I use plastic tubing for ice maker?

Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.

Are all ice maker lines the same size?

Tubing Sizes Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch, reveals Darrin’s Plumbing Tips. Check your refrigerator’s owner’s manual or the manufacturer’s website for the recommended size and type of water line for your unit.

Can you use ice maker without water line?

1-7 of 7 Answers No, you do not have to install the water line. The ice maker itself doesn’t take up too much space in the freezer, so you could just turn it off and pretend it’s not there.

How much does it cost to install a water line for an ice maker?

The cost for a plumber to install a water line for an ice maker is usually under $200.

Are all fridge water lines the same?

While water supply lines to refrigerators can be made of different materials like copper, plastic types and braided stainless steel, the good news is with adapters, most ice-maker supply lines should be able to connect to most refrigerators.

What causes ice maker water line to freeze?

Water lines won’t be able to deliver the proper flow of water to your ice machine if the line is plugged by mineral content or too small. The winter months can lead to frozen water lines, which is one of the most common ice maker problems caused by cold weather.

Why does my refrigerator water line freeze?

Setting an adjustable temperature control to its coldest setting with less than half of the drawer filled may cause your water tank to freeze. If there is not enough food in the drawer to absorb the cold, cold air will be transferred to the water tank, causing the tank and/or tubes to freeze.

Which water line is best for ice maker?

Copper and plastic are two common materials for an ice maker water line, which is vital for refrigerators with water dispensers and ice makers. Both copper and plastic are suitable materials to get the job done; however, they both have their pros and cons.

Can you replace the ice maker on a Norcold refrigerator?

Get that Norcold ice maker back in operation! Norcold uses one ice maker for all refrigerator models that can include one. It is a high-quality, very reliable unit made by Whirlpool. Internal parts are not replaceable on this unit, however, there are some parts that can be replaced that work in conjunction with the ice maker or icemaker.

What is the size of Norcold 633324 ice maker Assembly?

Norcold’s 633324 Ice Maker Assembly F/682. Refer to manufacturer recommendations to ensure a proper fit. Quick and easy installation. Norcold 633324 2.7 pounds 12.9 x 9.8 x 6.3 inches 633324 No 1 Certified frustration-free

What parts do I need to replace my ice maker?

You need the gear cover and the front bar that indicates if your full of ice and turns the ice maker on and off. This is not in description that I could find. I replaced my old unit identical to this one. The unit comes as shown in photo lacking some parts for a complete ice maker. Some of the old parts fit exactly and all works as expected.

Does the ice maker need 120 volts to operate?

I learned the ice maker requires 120 volts to operate and water pressure also, so don’t make my mistake. I connected my frig to the inverter but operate on propane most of the time and always have ice produced. My original 1200LRIM was not dumping the ice any longer. It was filling up the tray, but never would dump.